Halo headlights are growing in popularity. They’re so much cooler than the factory lights. And, you can guarantee that they’re going to look amazing on your Jeep Wrangler. Just remember that some lights are better than others. If you want to make sure that your money is well spent, you’ll need to do your research and get it right from the get go. So, what do you need to look for when attempting to invest in halo headlights for your Jeep Wrangler? You’ll find out in the comprehensive guide below.
Make And Model
Before doing anything, you’ll want to make sure that you check out the lights and ensure that they fit your Jeep Wrangler. There are several different types of Wranglers and not all lights are going to be compatible with them all. If you don’t you’ll be required to send them back in the future.
Pretty much all headlights are going to be waterproof. However, you need to understand that they’re going to have different waterproof ratings. If the rating isn’t good enough, there is a possibility that your lights are going to be damaged by the rain at some point. With that being said, you need to make sure that you have a waterproof rating of at least IP67. This will guarantee that your lights are able to handle anything Mother Nature throws their way.
You want to make sure that your money is put to good use. This is why it is pertinent to inspect the lifespan of the lights. Remember that the number is going to be an estimate. Nevertheless, it is still a good starting point. Some lights can last as long as 50,000 hours. In all likelihood, they’ll outlive your vehicle! Get the longest lifespan as possible so you don’t have to replace the lights in a few years.
When looking for the best halo headlights for a Jeep Wrangler, you’re definitely going to want to check out the irradiation distance. This basically tells you how far the light is capable of traveling. With a lower distance, you might not be able to see too far in head of your vehicle. You need the longest irradiation distance possible. Be sure that it is better than the average headlight.
LED Or Halogen
In the past, most automobile headlights were equipped with halogen bulbs. Halogen is great, but it is very sensitive and tends to die much sooner. With that being said, you’ll definitely want to invest in headlights that use LED bulbs. They’re going to last much longer and they’re far tougher than halogen.
When you see a unique headlight on the roadway, it is going to grab your attention for a few seconds. There is a good chance that you want your vehicle to have the same effect on other drivers. When attempting to find the right halo headlights for your Jeep Wrangler, you’ll definitely want to consider the appearance. How do they look when they’re flashing a turn signal? What does the low beam look like? Be sure that the headlights look great at all times and you’ll fall in love weight them.
Plug And Play Installation
In the past, a person could spend hours installing halo headlights on their Jeep Wrangler. Today, most manufacturers have taken the steps to design their halo headlights in a manner that offers an easy installation. An innovative feature that will ensure an easy installation is plug and play connections. These devices are designed to connect wires without splicing, attaching and taping. In fact, the device attaches directly into an output or another set of wires with the same design. The ideal is to offer quick and easy installations, so consumers will be more adamant about investing in these products.
The mere fact that you can easily install the headlights could save you from needing hire a mechanic or auto body technician to do it for you.
To determine the brightness of the halo headlights, you must make sure they are embedded with what is known as Cree Chips. These components are designed to deliver about 50 percent more brightness than factory and similar headlights.
Halo headlights can be extremely bright, especially when they are on high beam. The brightness can be dangerous for oncoming motorists, causing them to lose sight of the road. This is why manufacturers must have the Department of Transportation (DOT) approve their halo headlights, before they put them on the market. Never invest in a brand that is not DOT approved. Doing so could cause a fatality of another driver and cost you a hefty fine.
To prevent the headlights from overheating during operation, they are embedded with a cooling system. This system works as long as the lights are on to keep the internal components cool. Without this feature, the headlights would overheat and become damaged during the first use.
Diecast Aluminum Housing
The housing is a very important component of halo headlights. This component must be designed in a manner that ensure durability and longevity. Most manufacturers will utilize diecast aluminum to construct their housings. This material is not only lightweight, but also very durable. It is not unusual for some manufacturers to powder coat the diecast aluminum housing to add even more protection.
While you may believe that you are safe from an earthquake, the possibility is always there, especially if you live on the San Andreas fault line. Well, to protect your halo headlights from damage, if you are caught in an earthquake, they should be designed to resist violent shaking of the Earth’s surface.
Headlights are designed to last a long time. Nevertheless, you must understand that plenty of things can go wrong during the manufacturing process. And, a simple mistake can easily decrease the lifespan of the lights. This is why you need to pay close attention to the warranty. A one-year warranty is great, but something longer is far better. You want to be certain that you can get help should anything go wrong. The warranty will give you that peace of mind.